- 当前位置:Home > > Service > industry > Wireless product testing
- Wireless product testing
CTB (hereinafter referred to as CTB), the wireless communication detection division was established in May 2014, including a 966 international standard electromagnetic compatibility darkroom, a bluetooth testing laboratory and a number of bluetooth testing equipment.Among them, the wireless communication department is composed of several senior wireless communication technical engineers, and the tested products are various, including bluetooth BT products, wifi products, tablet computers, wireless keyboard/mouse, RFID, wireless transceiver, remote control, wireless intercom, wireless microphone, DECT products, 2G/3G/4G mobile phones and so on.Be able to have the R&TTE certification, the United States FCC ID, BQB, Canada IC ID, TELEC, JET certification in Japan, South Korea KCC certification, IDA certification in Singapore, China council for the wireless SRRC certification, Australia ATICK/CTICK, etc.Rich RF testing and certification experience, many years of EMC work experience, we can better and faster understand the industry's latest information and regulations, in order to adapt to the development trend of electronic products in the future, to meet the domestic and foreign electronic enterprises wireless communication product certification and other requirements.
一.Common wireless products:
二.Test standard range:
1. Test applicable standard products
En 301489-1 common technical requirements for rf products for emc testing
En 301489-3 electromagnetic compatibility testing for short range low power rf products
En 301489-7 GSM and DCS product electromagnetic compatibility test
En301489-9 wireless microphones and similar devices, cordless audio and headphone monitoring products
En301489-17 2.4ghz broadband data transmission and 5GHz wireless LAN product emc testing
En 301489-24 WCDMA product electromagnetic compatibility test
En 301489-25CD ma2000 product electromagnetic compatibility test
En301489-34 mobile phone external charger EPS
EN300330 (SRD) short range low power rf product test (operating frequency between 9KHz to 25MHz)
EN300220 (SRD) short range low power rf product test (operating frequency between 25MHz and 1000MHz)
EN300440 (SRD) short range low power rf product test (operating frequency between 1GHz and 40GHz)
EN300328 (DSSS, FHSS) 2.4GHz spread-frequency modulation technology product test
EN301893 IEEE 802.11 a
EN30135725MHz- 2000MHz cordless audio equipment
EN301406DECT products
EN301511 (GSM/GPRS) - wireless testing of GSM and DCS products
En301908-1 /-2 (WCDMA/CDMA2000) wireless test for WCDMA products
En 301908-1/ -4cdma2000 product wireless detection
GSM Repeater EN300 609-4
EN302208RFID products for wireless detection
NCC LP00002 (WLAN) low power rf product test
Electromagnetic compatibility test for NCC PLMN01 (GSM/GPRS) GSM and DCS products
NCC PLMN08 (WCDMA/CDMA2000) imt-2000 CDM/WCDMA product emc test
FCC part15 C/E/F intent radiation device test
FCC part 22 public mobile communications service
FCC part 24 personal communications service
FCC part 25 satellite communications service
FCC part 27 other FCC wireless communications services
FCC part 68 telecommunication terminal equipment
IC RSS 210 intended radiation device test
IC RSS 310 low power intentional radiation device test
IC RSS 132/133 mobile communication product testing
Specific absorption ratio (SAR) test for OET 65/IC RSS 102 /EN50360
Short range AS/NZS 4268.1 at 9KHz~ 25MHz
AS/NZS 4268.2 frequency in 25MHz~ 25GHz short-range devices
AS/NZS 4281 cordless telephone operating at 1.7MHz and 30~40MHz frequency band
SRRC China mainland low power rf products
KCC Korea RF and EMC requirements
TELEC: STD - T33 / T66 W52 W53 / J52 2.4 GHz frequency modulation technology product testing
Us FCC Part 68 Japan JATE eu TBR 21,38
Canada IC ES-03 Taiwan general administration of telecommunications certification of national communications regulations
2.Electromagnetic absorption rate (SAR test):
FCC OET65 RSS 102EN 50385
EN 50383EN 50364EN 62479
EN 50371EN 62311EN 5060
EN 62209-1和2mep评估
三.Wireless authentication service
Testing services
Wireless communications are conducted according to European ETSI standards, U.S. FCC standards, and other national standards such as those of Australia, China, Singapore, and Japan
Equipment testing
Electromagnetic compatibility test (EMC test)
Electrical safety and health protection test
Product radiation absorption rate (SAR test)
Certification services
Provide CE R&TTE certification service and notice Body certification service for wireless and communication terminal products to enter the European market
Provide FCC certification services
Provide Canadian IC certification service
Japanese communication products TELEC certification service
China radio transmission equipment model approval certificate SRRC certification service
China Taiwan NCC telecom inspection service
Bluetooth BQB authentication
Other services
World product certification
Notify the European radio frequency spectrum authority
Consultation service and rectification service
Training services